Mechanical Adjustment of the Arm Support Height
The height of the arm supports can be adjusted mechanically. The integrated scale will help you adjust both arm supports so that they are at the same height. The dimensions refer to the height of the arm support above the seat plate (with the arm support at a horizontal angle). Proceed as follows when you want to adjust the height:
Dismantle the arm support and pull it outwards (see Figure 10, “Removing the arm support” . A toothed component will fall out, which is used to lock the height into position. See Figure 11, “Toothed component used for height adjustment”.
Reattach the arm support from the side at the required height (refer to the scale). Do not forget the toothed component.
Reassemble everything in reverse order. Remember the cable tie!
 |