Skip to main content

Powering Off (Standby)

If not used for more than 24 hours, turn off the main switch.

To avoid problems with the battery when switching on, we recommend always switching off the wheelchair using the main switch if it is likely not used for more than 24 hours. After 24 hours, the battery automatically switches to "deep sleep" and can no longer be switched on using the standby button. See also section Error Messages.

  1. Make sure you are in park mode

  2. Press the standby button on the control panel. The wheelchair switches to an energy-saving standby mode (all LEDs switch off). From this mode it can be switched on again quickly by pressing the standby button .

Using the standby button as an emergency stop

You can return to park mode by pressing the standby button at all times. However, this is a fast shut-down, so the transition can be quite jerky. For this reason, you should only use this method in an emergency (see Emergency Shutdown)

Standby mode display
Figure 41. Standby mode display


In this section: