Dismantling the Arm Support
Remove the back cushion
If a cable is attached at the height adjustment: Unplug the cable from the box in the back support, remove the cable tie and guide the cable outwards.
Loosen the two height adjustment screws Figure 10, “Removing the arm support”. It may be a good idea to remove the plastic inlay to obtain easier access to the screws. To do so, remove the two inlay screws Figure 10, “Removing the arm support”
The arm support can now be lifted outwards.
(a) Screws to be loosened in order to remove the arm support |  (b) Screws to be loosened in order to remove the back support inlay |
Figure 10. Removing the arm support